7
How to program BIG FOOT
Using the keyboard in the upper right corner does all programming.
When turned on, the device automatically starts up on program no. 1.
You can easily form a general view of the different menus by pressing the yellow MENU-button in the center
of the keyboard. Subsequently you can ick through the menus by using the >,< -buttons.
NAMING PRESETS
Press the yellow MENU-button centered in the keyboard.
(The control-LED in the button will light up.)
It will say NAMING in the display. Press again on the MENU-button.
A small horizontal cursor ashes in the lower left corner of the display. Using the UP/DOWN switches you
can choose characters A thru Z or 0 thru 9.
Once the desired character is chosen, move the cursor to the right using the >-button and choose the next
character.
When the desired title has been entered, press the MENU-button. It will say NAMING in the display.
To exit the menu press the <-button. It will say QUIT in the display, nish the NAMING-session by pressing
the MENU-button again.
CHOOSING MIDI CHANNELS:
MIDI-communication consists of up to 16 MIDI channels. Each channel holds 127 presets.
Most choose to send on MIDI-channel no. 1. However BIG FOOT can be programmed to allow for the assign-
ment of multiple MIDI-channels.
GLOBAL SETUP:
Press the MENU-button and scroll to SELECT CH. using the >-button. Press the MENU-button again and it will
say “GLOBAL” in the display.
Press the MENU-button and the display now reads “CH1”. Scroll through the channels using the UP/DOWN
buttons and choose the desired channel by pressing the MENU-button. To end the session choose QUIT in the
submenu and subsequently choose QUIT in the main menu.
INDIVIDUAL SETUP:
Press the MENU-button and scroll to SELECT CH. using the >-button. Press the MENU-button again and it will
say GLOBAL in the display. Scroll to INDIVIDUAL using the >-button and press the MENU-button. It will say:
CH.1----------PR. 1 in the display. Choose channel number using the UP/DOWN buttons and program number
using the >,< buttons.
To end the session choose QUIT in the submenu and subsequently choose QUIT in the main menu.
To Next Page
Loading...
Need help?
General
