TW20_NS20_EW20 Series Weighing Indicator Operation Manual REV:01
5.10.9 Accumulation for Different Product
see parameters 2. ADVANCED SETTINGS >7.ACCUMULATION >2.ALLOW ALL PRODUCTS > YES
1Select a PLU from the direct PLU list or Indirect PLU list.
2The different product could be accumulated in weighing mode and percentage mode.
3Press key to view the records,the different product accumulation records appears.
NOTE:When switching between products with counting modes, there will be warning window to clear the
total. The user has to clear the total by pressing long CE from the ACC report.
5.11 Printing
5.11.1 Label Printing
It allows for printing the weighing result to external label printer.To enable the function, please refer to setup
menu
2. ADVANCED SETTINGS > 7.ACCUMULATION >1. ACCUMULATION MODE >MANUAL
5.INTERFACE >1.SERIAL >1.TYPE >RS232
5.INTERFACE >1.SERIAL >2.MODE >PRINTER
5.INTERFACE >1.SERIAL >4.EXTERNAL PRINTER > 2. OS2130D or 4. RP80VI
5.INTERFACE >1.SERIAL >6.BAUD RATE > 115200
5.INTERFACE >1.SERIAL >7.DATA BITS > 8
5.INTERFACE >1.SERIAL >8.STOP BITS > 1
5.INTERFACE >1.SERIAL >9.PARITY > NONE
The printer option should be selected as per connected printer model
Load the weight on the platform.
Press key to print out the data.
5.11.2 Receipt Printing
It allows for printing the weighing records to external receipt printer.To enable the function, please refer to
setup menu
2.ADVANCED SETTINGS > 7.ACCUMULATION >1. ACCUMULATION MODE >MANUAL
5.INTERFACE >1.SERIAL >1.TYPE >RS232
5.INTERFACE >1.SERIAL >2.MODE >PRINTER
5.INTERFACE >1.SERIAL >4.EXTERNAL PRINTER > TPuP
5.INTERFACE >1.SERIAL >6.BAUD RATE > 115200
5.INTERFACE >1.SERIAL >7.DATA BITS > 8
5.INTERFACE >1.SERIAL >8.STOP BITS > 1
5.INTERFACE >1.SERIAL >9.PARITY > NONE
To Next Page
Loading...
Need help?
General
