Need help?Do you have a question about the T Scale TW20 Series and is the answer not in the manual?
General| Model | TW20 Series |
|---|---|
| Category | Measuring Instruments |
| Display | LCD |
| Auto Power Off | Yes |
| Units of Measurement | kg, g, lb, oz |
| Tare Function | Yes |
| Overload Indication | Yes |
| Low Battery Indication | Yes |
| Maximum Capacity | 20kg |
| Power Supply | AC Adapter or Battery |
| Functions | Weighing |
Essential safety warnings and cautions for handling the weighing instrument.
Detailed safety guidelines for operating and handling the weighing scale.
Introduces the TW20_NS20_EW20 series and its industrial application capabilities.
Visual overviews of the TW20, NS20, and EW20 models, highlighting key components.
Details the available interface ports for connectivity on TW20, EW20, and NS20 models.
Steps for safely unpacking the scale and inspecting for damage and completeness.
Guidance on placing the indicator and connecting load cell cables to the terminals.
Information on connecting the RS232 cable and the power adapter, plus battery charging.
Step-by-step instructions for installing label and receipt paper rolls in the EW20 model.
Visual representation of the key layouts for TW20, NS20, and EW20 models.
Details the purpose and usage of each key on the weighing indicator.
Explains the various indicators and symbols shown on the scale's display.
Further details on indicator icons, symbols, and status messages shown on the display.
How to turn the scale on/off, log in, and set the scale to zero.
Covers semi-automatic, automatic, and pre-set tare functions for zeroing container weight.
Instructions for storing and recalling pre-set tare values for products.
Basic weighing steps and how to convert between different weighing units.
How to convert and select different weighing units (kg, g, lb, etc.).
Procedures for storing and recalling product (PLU) information.
Explains how to recall and store direct and indirect PLU data.
Guide to using the scale for counting parts by sampling or known unit weight.
Details the steps for simple sampling in parts counting.
Steps for inputting the count number and confirming the sample.
How to manually input the known average piece weight for parts counting.
Describes automatic part weight updates for optimizing counting accuracy.
How to perform percentage weighing by setting a sample weight as 100%.
How to manually add weights to the accumulation memory.
Information on enabling and using the auto-load accumulation feature.
How to use the auto-unload accumulation feature.
How to view and print stored accumulation records.
How to clear the accumulation memory.
Settings for printing accumulation data in manual, auto-load, and auto-unload modes.
Instructions for setting up and performing label and receipt printing.
Instructions for printing weighing records using the built-in printer (EW20 model).
Configuration of beep modes for tolerance checking alerts.
How to set upper and lower limits for target weight in tolerance checking.
How to set upper and lower limits for target quantity in tolerance checking.
How to set upper and lower limits for target percentage in tolerance checking.
How to enter specific modes for weight, quantity, or percentage tolerance checking.
How to adjust the display backlight brightness for better visibility.
Configuration for the automatic power-off feature to save energy.
Using the scale mode designed for weighing moving items.
How to use the peak hold feature to capture and display the maximum weight reading.
How to enter the parameter menu and use the keys for settings.
Details on accessing and modifying active parameters, including physical switch locations.
Step-by-step guide to perform normal calibration of the weighing scale.
To Next Page
