TW20_NS20_EW20 Series Weighing Indicator Operation Manual REV:01
5. OPERATION
5.1 Power On/Off
Press key to switch power-up, it will be heard “beep” sound ,the scale show company logo, and come to
normal weighing mode.
Hold key 1.5 seconds to switch off the scale.
5.2 Log in
It allows multiple users to operate the same indicator
1 When power is on ,it may be asked to input the account
and password to log in.
2 Input the account by using numeric keys ,
press key to confirm.
3 Input the password by using numeric keys ,
press key to confirm.
4 Display show log in success and come to normal
weighing mode.
Note:
1. To enable Login function, see parameters 1.System settings >4. Require login > Yes.
2. Account and password need to be set on the scale in advance, the scale needs to restart after setting up to
enter the login .
3. Technician account number is 1000, password is 000000.
5.3 Zero Setting
Zero setting allows to do by pressing key, only it’s possible when the load receptor is not in motion.
5.4 Tare
5.4.1 Semi-automatic tare
The indicator is provided with a semi-automatic subtractive tare.
The weight of any container can be tared by pressing button so that with subsequent weighing the net
weight of the object being weighed is always displayed.
To Next Page
Loading...
Need help?
General
