T Scale TW20 Series - Limits Setting for Target Quantity

TW20_NS20_EW20 Series Weighing Indicator Operation Manual REV:01
- 37 -
4 The upper limit value and HI words in the display
will be active.
5 Press key to confirm when entered
the upper limits with numeric keys.
6 Limits setting completed,Load the weight
on platter,the check weighing control will start .
7 To disable the check weighing function,enter zero in both limits.
5.12.3 Limits setting for target quantity
1 To enter counting mode by sampling or inputting the known unit weight of item.
2 Press and hold key to enter limits setting.
3 The lower limit value and LOW words in the display
will be active in turn.
4 Press key to confirm when entered
the lower limits with numeric keys.
5 The upper limit value and HI words in the display
will be active in turn.
6 Press key to confirm when entered
the upper limits with numeric keys.