T Scale TW20 Series User Manual

TW20_NS20_EW20 Series Weighing Indicator Operation Manual REV:01
- 25 -
5.7.4 Recall direct PLU
In normal weighing mode,press M key (selected from to ）to recall direct PLU.
5.8 Parts Counting
Weigh a sample to calculate the unit weight to determine the average weight of items to count, put a known
number of pieces on the scale . The balance of the total weight divided by the number of samples and displays
the unit weight.
Note:Before operation scale should be stable and return to zero, sampling available only when weight more than
20d .
5.8.1 Manual Sampling for counting procedure
5.8.1.1 Simple Sampling
 Make sure platter empty and display return to zero.
 Put a container on platter and press key if necessary.
 Place a unknown amount of pieces on the scale.
 Press key to confirm when scale stable.
 The digits in the sample window will be active.
 If necessary press key to change the parts quantity (10/20/50/100).

T Scale TW20 Series Specifications

General

Brand	T Scale
Model	TW20 Series
Category	Measuring Instruments
Language	English