- 9 -
6.9 AUTOMATIC ACCUMULATION
When the scale has been set to Automatic Accumulation the value is stored in
memory automatically.
Add a weight to the scale, the beeper will sound when the scale is stable to signify
the value is accepted. Remove the weight.
The display will show "ACC 1" and the totals in memory when the scale returns to
zero. Adding a second weight will repeat the process.
While the weight is on the scale it is permissible to press the PRINT key to store the
value immediately. In this case the scale will not store the value when the weight is
removed.
The totals can be viewed as above.
In all cases the scale must return to zero or a negative number before another
sample can be added to the memory.
More product can then be added and PRINT pressed again. This can continue for up
to 99 entries, or until the capacity weight display is exceeded.
To Next Page
Loading...
Need help?
General
