ATP/ASP/QTP/QSP Price Computing Scale User’s Guide
- 2 -
1.4 INSTALL
Keep the scale dry. Precipitation, humidity and all types of liquids or moisture can
contain minerals that will corrode electronic circuits.
This scale is not waterproof designed (IP44), avoid high humidity that might cause
condensation. Avoid direct contact with water. Do not spray or immerse the scales in
water. If scale meet water, reading data will be unstable, or scale will can’t work
correctly, please turn off the power immediately, warm the scale, or call your dealer.
Attach the main cable to the connector on
the bottom of the scale. The power switch is
located on the base near the front of the
scale.
Power switch is at the right side of bottom
cover, AC adapter jack also near the power
switch, see attached drawing.
To Next Page
Loading...
Need help?
General
