Taarup 4028 - Safety Instructions During Crane Lift

21
5 Safety instructions during crane lift
Only use approved crane material. Weight is stated on drawings. Make sure that crane
straps are securely fastened before lifting. Use a guide wire to keep the machine in
position.
Be careful, - make sure that nobody stands under or near the machine when it is being
lifted.
1 ..............
Basic machine without drawbar. Crane hooks must be fastened to lifting brackets C (2
pcs.).
2 ..............
Basic machine with swivel hitch.
The drawbar A of the machine must be turned to transport position. The drawbar has no lifting
brackets, - use approved lifting slings securely fastened to the drawbar as shown. Crane hooks must
be fastened to lifting brackets C (2 pcs.).
Models 4024 - 4028 - 4032 - 4036: The drawbar cylinder safety chain must be fitted (transport
position).
Models 4028 C - 4032 C - 4036 C: The machine drawbar must be in the mid position.
2 ..............
Basic machine with wide-angle hitch.
The drawbar of the machine must be turned from transport position. The drawbar cylinder safety
chain must be fitted (transport position).
The machine is lifted using the drawbar bracket B and lifting brackets C (2 pcs.) on the basic
machine.
a