-34-
Examples:
Overview Tab: Indicates how the pump is operating in real time values.
Note: no adjustments can be made from this page.
Operation Data: Real time operational data and maximum values
Example: Power is 4 Watts (pump is in standby) – and has a maximum wattage of 1550W, shown in brackets.
Control Signals: Mode switch setting and all external control input settings and actual values.
IMPORTANT: This is where the actual value of a 0-10Vdc signal can be read
Status: Indicates any current error codes, motor and controller temperatures and number of power cycles
Pump Tab: Where pump settings can be made (when not using the user interface)
To Next Page
Loading...
