Taco 00e Series

-36-
Set 1, 2 and 3: Depending on Mode Switch setting various drop-down selections are available
Relay Function: Ability to change the event that changes the relay position (Pump Fault, Pump Ready,
Pump Operation, Always on and No Function). Pump Fault is factory default.
Save All: IMPORTANT: Any changes made in this tab require the SAVE button be clicked
for the changes to take eect.
Network Tab:
Network Settings: Edit and congure Network communication, settings for
Parallel Pump mode and the ability to set passwords.
LOG Tab:
Event Code: Additional information: Access to the error code history