(844) 482-2822
REFORMATTING YOUR CARD
GETTING TO KNOW YOUR TACTACAM:
Insert the microSD Card adapter into your computer which will allow
you to use the standard SD Card reader on your computer to access
the les.
Next, reformat your SD Card before use. When you reformat a SD
Card it erases all data on the card. If you need assistance reformatting
your card see the following:
For a Mac:
Visit tactacam.com/support and to see video “SD Card
Reformat on a Mac Computer” for full detailed instructions
For a PC:
Visit tactacam.com/support and to see video “HSD Card
Reformat on a Windows Computer” for full detailed instructions
Notes: It is best to format your SD Cards before using and only
use SD Cards approved by Tactacam for Tactacam cameras.
When formatting your SD Card use ExFAT. For a list of the
recommended microSD Cards, visit tactacam.com/support
Use care when handling memory cards. Avoid liquids, dust, and
debris. As a precaution, power off the camera before inserting or
removing the card. Check manufacturer guidelines regarding use in
acceptable temperature ranges.
To Next Page
Loading...
Need help?
General
