TAILY AUTOMATION CNC-110STD - Installation and Wiring Guide; Counting System Assembly; Home Sensor Assembly

CNC-110STD C-120 User's manual
5
έᚊ࿪ཝҋજѣࢨΦ
TAILY AUTOMATION CO.,LTD.
7. Installation and wiring
7.1. Counting system assembly (unit=mm)
The counting disc and the sensor must assembly as below, otherwise it will count improperly.
Min.
Max.
Counting disc
1.0
Winding spindle
3.0
Zeroing sensor
Zeroing disc
Counting sensor
※
The CNC-110STD do not need to use the Zeroing disc.
7.2. Home sensor assembly (unit=mm)
HOME SENSOR must be assembly as below, otherwise a fault may occur.
3.0
1.0
Interrupter
Min.
10.0
Guiding traverse
shaft
Min.
Max.
Screw
1.0
Home sensor
Max.