Tait TM9100 Series P25

P25 services 79
The red LED glows and a message may be
displayed to advise you whether the message has
been sent successfully or not.
If an acknowledgement is not received from the
recipient’s radio, you will have the option of either
canceling or resending the call alert page.
Sending a message to a person of your
choice
1 Press Menu and select Services > Messages.
(Depending on how your radio is programmed, you
may be able to press a function key or use your
Quick Access menu to select messages.)
2 Select the message you want from the message
list.
3 Press Select.
4 Select the message recipient from the list and
press Send.
A message showing the destination briefly
appears in the display.
The red LED glows and a message may be
displayed to advise you whether the message has
been sent successfully or not.
If an acknowledgement is not received from the
recipient’s radio, you will have the option of either
canceling or resending the request.
Messages
En route
At scene
SelectCancel
Send message
Car 2
Car 3
SendCancel
Sending
message to
Car 2
Cancel