Tait TM9100 Series P25 User Manual

P25 services 81
The red LED glows and a message may be
displayed to advise you whether the status update
has been sent successfully or not.
If an acknowledgement is not received from the
recipient’s radio, you will have the option of either
canceling or resending the request.
Status request
This feature is only available on P25 conventional
channels.
You can find out what another radio user is currently
doing by asking their radio to send you a status
update.
To send a status request:
1 Press Menu and select Services >
Status request.
2 Select the status request recipient from the list.
3 Press Send to.
A message showing the destination appears in the
display.
The red LED glows briefly. If the request was
successful, a message showing the status
appears in the display.
Status request
Car 2
Car 3
Send toCancel
Sending sts
rqst to
Car 2
Cancel
Status rx’d
At lunch Car 2
Cancel

Tait TM9100 Series P25 Specifications

General

Brand	Tait
Model	TM9100 Series P25
Category	Radio
Language	English