Tait TOP User Manual

Midian Encryption Programming and Service Manual Tait Orca Portable (TOP) Encryption 41
June 2006 © Tait Electronics Limited
Fit Encryption Module
Note Before performing these steps, ensure that the encryption mod-
ule’s flex edge connector is facing toward the TOP PCB
1. Remove R5 and R6 on flex.
2. Fit flexiloom firmly into module’s flex edge connector
3. With main RF shield beside PCB as shown, fit flex into RF shield
flex edge connector
Note There is no flex-edge connector in the Tait Orca Elan or T5010
models. If fitting to these radios, tape the flexiloom at this edge
to prevent it shorting.
4. Gently fold the flexiloom to refit the RF shield into the chassis, then
reassemble the radio according to standard procedures.
5
1
4
1
3
2

Tait TOP Specifications

General

Brand	Tait
Model	TOP
Category	Radio
Language	English