To set the embroidery speed
92
Chapter 5
UO04
3-3. To decide upper limit value of the maximum speed (Max. Revolution Limit)
This operation requires input of the password.
3-3-1. Explanation on the screen
3-3-2. How to operate
The following is the example that Max. Revolution Limit is set to "950".
(1) Set to main screen.
(2) To press F2 key while pressing SET, and press SET further
(3) To cancel the password
Regarding canceling method, refer to the detail page. (p.141)
(4) To select limit of max revolution
SET
1 Max. Revolution Limit
F2
Password:
Inputting column of current password
1 Max. Revolution Limit
1000
[rpm]
SET
F2
Upper limit value
To Next Page
