How to use each part
20
Chapter 2
2-6. Laser Crosshair Marker (option)
It is possible to irradiate laser beam to fabric and check the position to embroider. (p.211)
Safety standard of Laser Crosshair Marker installed in the machine is the class "1".
It conforms to the standard of regulation in the USA (21CFR1010 and 1040).
Do not watch irradiation aperture of the laser beam directly or do not interrupt the laser
beam with your hand or finger.
Laser Crosshair Marker
It cannot be used together with the position marker at the
same time.
The name of the manufacturer, the address and other
contact details of Laser Crosshair Marker are as follows.
Lanics Co., Ltd
Room#703, 7F Woolim e-Biz Center
170-5, Guro-dong, Guro-gu, Seoul, 152-050, Korea
TEL: +82-2-2108-2255
FAX: +82-2-2108-2260
E-mail: support@lanics.com
http:// www.lanics.com
To Next Page
Loading...
