To change color
76
Chapter 5
VN03
1-2. To light the laser crosshair marker manually (Manual return to marker position)
1-2-1. Explanation on the screen
1-2-2. How to operate
The following is an example of executing the color change to the laser crosshair marker position to light the
laser crosshair marker.
(1) To open screen
(2) To execute the color change for lighting the laser crosshair marker.
: To execute
When performing this operation, do not put your hands etc. around the needle bar case.
Moving needle bar case could injure you.
3 Manual return to marker position
3 Manual return to marker position
To Next Page
Loading...
