Takagi OM-8 - Page 38

32
Operation
OM8-T64
Magnificationchanger
㪈
㪈㪅㪍
㪉㪅㪌
㪇㪅㪍
㪈
㪇㪅㪋
3.Turn the magnification change knob and
maximaize the magnication.
OM8-T60
Lightintensity
controlknob
4.Turn the microscope light intensity control knob
to the right and adjust the brightness of the
microscope's visual eld.
5.Stepping on the front or back of the foot switch
unit's focus switch, adjust the focus on the
target location.
OM8-T61
Focusswitch
forrise
Focusswitch
fordescent
6.Operating the foot switch unit's X-Y lever, move
the microscope's visual field to the target
location.
・To operate the X-Y lever, tilt it in the direction
that you want to move the microscope's visual
eld. Thus, if you want to move the visual eld
to the left or the right, push the X-Y lever down
to the left or the right; if you want to move the
visual field diagonally, push the lever down
diagonally in the desired direction.
・Each time the foot switch unit's lamp on/off
switch is pressed , the lamp goes either on or
o󱐯.
OM8-T62
X-Ylever
Lampon/offswitch