Takagi OM-8 - Connecting The Power Cable

25
Installation
■ Connecting the Power Cable
WARNING
● Be sure to connect to the earth securely.
● Do not touch the power plug with wet hands.
● Insert the power cable plug securely, so that it won't become loose.
● Use the socket exculusively for the power cable, do not put other loads on the socket.
● Connect the instrument directly to a suitable wall outlet.
1.Set the voltage selector at the back of the lamp
arm to the working voltage.
2.Insert the power plug in a dedicated wall outlet.
* If the plug should become loose, imperfect contact
or electric shock could result.
* When disconnecting the power cable from the
socket, pull it out by the plug. Do not pull it out by
the cord.
Voltageselector
OM8-T48
OM8-T49
PowerCable
PowerPlug
DedicatedWallOutlet
Insert
CAUTION
OM8-T47-4
㪝
㪪
㪬
㪚
㪦
㪦
㪚
㪬
㪪
㪝
㪱
㪤
㪦
㪦
㪱
㪦
㪦
㪤
ZOOM
LO
ZOOM
HI
FOCUS
UP
FOCUS
DOWN
Press
2. Take off connectors from the pedal to be
changed. The connectors can be taken off by
pressing and taking o󱐯 the hook on the back.
3.Connect the connectors from the pedal to
required plugs for zoom up/down and focus
up/down.
*Be sure to connect the connectors tightly.
Imperfect connection may not waterproof the
connectors.
4. Stick the spare labels on positions of the layout.
5.Attach the back cover by tightening the four
screws in the back.
*Make sure that the new layout works properly.