Takagi OM-8 - Changing The Fuses

35
Replacing Consumables
■ Changing the Fuses
1.Press the "O" side of the power switch,
turning power o󱐯. Pull the power cable plug
out of the socket.
2.Using a plus screwdriver, loosen and
remove the fuse holder marked 250V 15A
at the back of the lamp arm by turning it
counterclockwise.
・The fuse will come out together with the
holder.
3.Replace the fuse (with one of the correct
rating). Then put the fuse holder back in
place, and secure it by turning it clockwise
with a plus screwdriver.
4.Using a minus screwdriver, rotate the fuse
holder 90°counterclockwise and pull out the
fuse holder at the back of the lamp arm.
・The fuse will come out together with the
holder.
*Order fuses through us or our distributor. (Not
commercially available)
Fuseholders
OM8-T70
Fuseholder
OM8-T71
Rotate90°
counterclockwise
OM8-T69
Takeout
4.Take the lamp out of the socket and replace
it with a new one.
5.Put the lamp and socket back in place, and
insert the lamp unit back