49
CONTROLS
Levers and Pedals
Safety Lock Lever
WARNING
¡¡
¡¡
¡Before leaving the operator’s seat, set
the safety lock lever securely to the
lock position and stop the engine. If
any controls should be touched
accidentally when the safety lock lever
is lowered, the machine will move
suddenly, and cause serious injury or
death.
¡¡
¡¡
¡Note that the dozer blade, boom swing
and auxiliary hydraulics controls are
not locked, even when the safety lock
lever is set to the lock position. Do not
touch these controls accidentally.
¡¡
¡¡
¡Be careful not to touch the operating
levers when raising and lowering the
safety lock lever.
This device is for locking the hoe attachment,
slewing and traveling.
When the lever is lifted, the lever stand
springs up and the lever is locked.
Cab types only have left safety lock lever.
Canopy types
¡Locking is possible by operating only one
side.
¡To unlock, both sides must be operated.
C4B018
To Next Page
Loading...
