200
OPTIONS
Hydraulic Breaker
For handling of the breaker, read the
hydraulic breaker’s manual, provided
separately.
IMPORTANT: When mounting devices,
select devices suited for this machine.
For advice on selecting device, contact a
Takeuchi sales or service outlet.
Precautions on Operating
< TB153FR >
< TB180FR >
¡ Run the engine with 75% the maximum
speed.
¡ Pound with the chisel perpendicular to the
surface you are pounding.
¡ When pounding, press the chisel properly
against the object to be broken so as to
avoid pounding the air.
¡ Do not pry with the chisel, and do not pry
while pounding.
¡ Do not move the chisel while pounding.
¡ Do not pound continuously for over 30
seconds on the same surface.
¡ Do not pound with the cylinder fully
extended or contracted (at the stroke end).
Leave a margin of at least 5 cm.
Pressing force
D5L005
To Next Page
Loading...
Need help?
General
