2-51
CONTROLS
c. Stop the engine and wait for at least 5
minutes until bubbles escape from the
hydraulic oil in the tank.
IMPORTANT: Follow the procedures for
purging air as instructed by the
attachment manufacturer, if applicable.
6. Check for oil leaks.
ACCESSORIES
Operating the auxiliary hydraulic circuits
1. Operate the auxiliary hydraulic buttons as
follows.
Auxiliary hydraulic buttons
To discharge from the hydraulic oil port (e)
.................................................... Press (E)
To discharge from the hydraulic oil port (f)
....................................................Press (F)
To Next Page
Loading...
Need help?
General
