To Next PageTo Next Page
Need help?Do you have a question about the Takeuchi TL250 and is the answer not in the manual?
General| Engine Make | Yanmar |
|---|---|
| Engine Power | 74 hp |
| Lift Height | 3, 275 mm |
| Net Power | 73.5 kW |
| Travel Speed - High | 11.8 km/h |
| Hydraulic Pump Flow | 92.5 L/min |
| Auxiliary Hydraulic Flow | 92.5 L/min |
| Width | 1, 980 mm |
| Engine Model | 4TNV98 |
| Travel Speed - Low | 7.2 km/h |
Brief introduction to the manual's content and purpose.
Instructions on how and where to store the operator's manual.
Location to record machine and engine serial numbers.
Defines the orientation of the machine from the operator's perspective.
Lists the primary intended uses of the machine.
Highlights key characteristics and systems of the machine.
Guidelines for the first 100 hours of operation to ensure longevity.
Essential safety rules applicable to all operations and maintenance.
Safety measures to take before starting machine operation.
Safety procedures to follow when starting the engine.
Safety guidelines to observe during machine operation.
Procedures for safely stopping and parking the machine.
Safety measures to follow when transporting the machine.
Safety guidelines to follow during machine maintenance.
Explains the meaning and location of safety decals on the machine.
Identifies and labels the main parts and components of the machine.
Information on opening, closing, and securing machine doors and covers.
Instructions for adjusting the operator's seat and fastening the seat belt.
Description of gauges, indicators, and warning lamps on the control panel.
Explanations of various switches used to operate machine functions.
Operation and function of control levers and pedals.
Information on optional equipment and accessories.
Essential checks and procedures before starting the machine.
Detailed steps for starting and stopping the engine safely.
General principles and techniques for operating the machine.
Specific guidelines and prohibitions for safe machine operation.
Procedures for safely parking the machine.
Precautions and preparations for operating in cold conditions.
Guidelines for operating and maintaining rubber tracks to prevent damage.
Safe procedures for lifting and hoisting the machine.
Step-by-step instructions for safely loading and unloading the machine.
Methods for securely fastening the machine during transport.
Key safety rules and considerations for transporting the machine.
Fundamental principles and cautions for machine maintenance.
Technical specifications, charts, and tool information for maintenance.
Identification of parts requiring periodic replacement for safety.
A schedule outlining maintenance tasks and their intervals.
Daily pre-operation inspection checklist for safety.
Routine checks and fluid level inspections performed every 10 operating hours.
Initial maintenance procedures for new machines.
Maintenance tasks to be performed every 50 operating hours.
Maintenance tasks to be performed every 100 operating hours.
Specific maintenance for new machines after 250 hours.
Maintenance tasks to be performed every 250 operating hours.
Maintenance tasks to be performed every 500 operating hours.
Maintenance tasks to be performed every 1000 operating hours.
Maintenance tasks to be performed every 1500 operating hours.
Maintenance tasks to be performed every 2000 operating hours.
Maintenance tasks to be performed every 3000 operating hours.
Maintenance tasks performed based on specific conditions or needs.
Procedures for properly storing the machine for extended periods.
Identifies normal operational sounds or behaviors that are not actual faults.
Troubleshooting steps for an overheating engine.
Procedures for addressing a dead battery, including jump-starting.
Steps to take after the machine runs out of fuel, including bleeding the system.
Troubleshooting steps for blown fuses and fusible links.
Diagnosing issues indicated by illuminated warning lamps.
Guide for troubleshooting various other machine issues.
Manual procedure to lower lift arms with the engine stopped.
Safety guidelines and procedures for towing the machine.
Key technical data and specifications for different machine models.
Physical measurements and dimensions of the machine.
Information on the machine's operational capabilities and limits.
General safety and handling advice for optional attachments and features.
Details on the operator seat with integrated safety switch functionality.
Information on the operation, maintenance, and cautions for the air conditioning system.
Procedures for installing and removing attachments using the hydraulic quick-hitch.
Guidelines for connecting and disconnecting hydraulic quick-couplers.
Specific procedures for the 4-port quick-coupler system.
Table listing the mass of various optional equipment.
Specific options and packages available for the US market.
Details on the high ambient cooling package for the TL250 model.
