Takeuchi TL250 User Manual

CONTROLS
Levers and Pedals
Safety Bar
A_ WARNING
• Before leaving the operator's seat,
raise
the safety bar to engage the lock
and stop the engine.
If any controls are touched accidentally
when
the safety bar is lowered, the
machine will move suddenly, and cause
serious injury
or death.
• Be careful
not to touch the control
levers and pedal when lowering
or
raising the safety bar.
T7B015
This device is for locking the control levers
and selector, detent mode and high- flow
switches.
When the safety bar is lifted, the levers and
switches are locked.
Throttle Lever
This lever controls the engine speed.
(A) ............ Low idle
(B) ... ... ..... Maximum speed
Throttle Pedal (Option)
This pedal controls the engine speed.
(A) .... ... ..... Low idle
(B) ... ... . ... . Maximum speed
61

Takeuchi TL250 Specifications

General

Engine Make	Yanmar
Engine Power	74 hp
Lift Height	3, 275 mm
Net Power	73.5 kW
Travel Speed - High	11.8 km/h
Hydraulic Pump Flow	92.5 L/min
Auxiliary Hydraulic Flow	92.5 L/min
Width	1, 980 mm
Engine Model	4TNV98
Travel Speed - Low	7.2 km/h