Takeuchi TL250 User Manual

MAINTENANCE
Every 1000 Hours
• Cylinders
1. Start the engine and run it at low idle for
10 minutes.
2. Set the engine to a low idle, then extend
and retract all the cylinders 4 or 5 times,
without going to the stroke ends.
3. Run the engine at high speed, then extend
and retract all the cylinders 4 or 5 times,
without going
to the stroke ends.
4. Set the engine back to a low idle, then
extend and retract
all the cylinders 4 or 5
times
to the stroke ends.
Inspecting and Adjusting the
Engine Valve Clearance
This operation requires experience. Have it
performed by a Takeuchi dealer.
Retightening the Engine Cylinder
Head Bolts
This operation requires experience. Have it
performed by a Takeuchi dealer.
148
MAINTENANCE
Every 1500 Hours
Inspecting and Cleaning the
Engine Fuel Injectors
This operation requires experience. Have it
performed by a Takeuchi dealer.
Inspecting the Crankcase
Breather System
This operation requires experience. Have it
performed by a Takeuchi dealer.

Takeuchi TL250 Specifications

General

Engine Make	Yanmar
Engine Power	74 hp
Lift Height	3, 275 mm
Net Power	73.5 kW
Travel Speed - High	11.8 km/h
Hydraulic Pump Flow	92.5 L/min
Auxiliary Hydraulic Flow	92.5 L/min
Width	1, 980 mm
Engine Model	4TNV98
Travel Speed - Low	7.2 km/h