Takeuchi TL250 User Manual

INTRODUCTION
Foreword
This manual describes operation, inspection and maintenance of the machine, as well as
safety instructions to be heeded during these operations.
If you have any questions about the machine, please contact a Takeuchi dealer.
• Manual storage
A compartment for storing this manual
is provided at the position shown in the
diagram below.
1. Insert the starter key and turn it
counterclockwise to unlock the cover
(1 ).
2. Open the cover (1) .
3. After using the manual, place it in the
plastic pouch
and store it in the manual
storage.
Type A
TypeB
2
• Serial numbers
Check the serial numbers of the machine
and the engine
and write them in the spaces
provided below.
Machine number :
Engine number :

Takeuchi TL250 Specifications

General

Engine Make	Yanmar
Engine Power	74 hp
Lift Height	3, 275 mm
Net Power	73.5 kW
Travel Speed - High	11.8 km/h
Hydraulic Pump Flow	92.5 L/min
Auxiliary Hydraulic Flow	92.5 L/min
Width	1, 980 mm
Engine Model	4TNV98
Travel Speed - Low	7.2 km/h