3-17
OPERATION
Do not cut across or go diagonally across a
slope. Doing so may cause the machine to
tip over or the tracks to come off and/or
extremely wear.
OPERATING PROCEDURES
Do not use this machine beyond the
specifications or overfill the bucket.
Do not use the downward force of the
bucket to drive piles.
Do not dig down too deeply at a time. Doing
so could damage the bucket and the lift
arms.
Do not allow the bucket to bump against
rocks or the like. Doing so could damage the
bucket and/or the cylinder.
Hydraulic cylinders could be damaged due
to excessive force applied, if fully extended
or retracted. Allow for a safety margin when
operating the cylinders.
To Next Page
Loading...
Need help?
General
