Talkpod A36plus User Manual (English)

Other manuals for Talkpod A36plus

Questions and Answers:

J
Jennifer LandryJul 29, 2025
Why is the sound weak on my Talkpod A36plus?
- M
  msmithJul 30, 2025
  If your Talkpod Radio has weak, intermittent, or no sound during reception, try the following: * Charge or replace the battery, as the battery voltage may be low. * Increase the volume using the volume control knob. * Ensure the antenna is properly installed after turning off the radio. * Clean the speaker surface. If the issue persists, contact your dealer or authorized service center for inspection and repair.
J
Jose WrightAug 5, 2025
How to fix Talkpod A36plus that won't turn on?
- K
  Kevin LambAug 5, 2025
  If your Talkpod Radio fails to power on, it might be due to several reasons. First, remove and reinstall the battery, ensuring it is correctly placed. If that doesn't work, the battery may be depleted, so try removing or replacing it. Also, check the battery contacts for dirt or damage; clean them if necessary. If the problem continues after these steps, contact your dealer or authorized service center for inspection and repair.
A
Adam HamiltonAug 11, 2025
Why does my Talkpod A36plus have excessive background noise?
- D
  David ButlerAug 11, 2025
  If you are experiencing excessive background noise on your Talkpod Radio, it could be due to several factors. If you are too far away from other members during communication, try getting closer. Poor location, such as being obstructed by tall buildings or being in a basement, can also cause this issue, so move to an open and flat area. Additionally, interference from external environment or electromagnetic sources may be the cause, so avoid devices that may cause interference.
K
kristingutierrezAug 16, 2025
What to do if Talkpod Radio has noise in the channel?
- B
  Betty QuinnAug 17, 2025
  If you hear other call sounds or noise in the channel on your Talkpod Radio, it could be due to interference from other users on the same frequency. Try changing to a new frequency or adjusting the squelch level. Alternatively, it may be because no sub-audible signaling is set. Set sub-audible signaling for all radios in the group to prevent interference, ensuring the signaling settings are changed on all handheld terminals within the group.

Talkpod A36plus Specifications

General

Frequency Range	UHF: 400-470 MHz
Antenna Impedance	50Ω
RF Power Output	5W
Modulation Type	16K0F3E/11K0F3E
Audio Power	1W
Waterproof Rating	IP54
Bluetooth	No
Vibration Alert	No
FM Radio	Yes
Voice Prompt	Yes
Battery	1500mAh Li-ion
Operating Voltage	3.7V

Talkpod A36plus Manual

Table of Contents

Other manuals for Talkpod A36plus

Questions and Answers:

Talkpod A36plus Specifications