Talkpod A36plus - Common Issues; Receive End Tone Functionality; DC1200 Signaling End Tone Issues

www.talkpodonline.com
Troubleshooting
Troubleshooting
Description
Analysis
Solution
The battery may not be
installed correctly.
Remove the battery and
reinstall it.
The battery may be
depleted.
Remove or replace the
battery.
Power-on
failure.
Poor battery connection
due to dirty or damaged
battery contacts.
Clean the battery
contacts. If the problem
persists, contact your
dealer or an authorized
service center for
inspection and repair.
Low battery voltage
Charge or replace the
battery.
Low volume
Increase the volume by
rotating the volume
control knob.
Antenna may be loose or
improperly installed
Reassemble the antenna
after turning off the
walkie-talkie.
Weak,
intermittent, or
no sound when
receiving
Speaker may be blocked
or damaged
Clean the speaker surface.
If the problem persists,
contact your dealer or an
authorized service center
for inspection and repair.
Unable to
communicate
with other
Frequency or signaling
settings may not match
with other group
Set the same frequency
and signaling as other
group members.