Talkpod A36plus - Troubleshooting; Power On and Sound Issues

www.talkpodonline.com
members.
group members
Too far from other group
members
Move closer to them.
Interference from same
frequency users
Change to a new
frequency or adjust the
squelch level.
Other
conversations or
noise in the
channel
Sub-audio signaling not
set
Set sub-audio signaling
for all walkie-talkies in the
group to prevent
interference. Note that all
handheld terminals in the
group must change their
signaling settings
simultaneously.
Communication distance
between members is too
far
Move closer to other
members.
Poor location, such as
being blocked by tall
buildings, or in a
basement
Move to an open and flat
area and restart the
device.
Excessive noise
Affected by external
environmental or
electromagnetic
interference
Stay away from devices
that may cause
interference.