appear at the top of the screen)
3. Choose online/offline code through menu item 29. (Select when to
transmit the ID code)
◉ If the online/offline code function in menu item 29 is set to off, the ID
code function will be disabled.
◉ During transmission, the device name is sent out via signaling, and
devices using the same protocol will receive the name information in
Chinese and English.
S-Meter Display
1. Enable the S meter display through menu item 50.
2. When receiving a signal, if the signal report is greater than 59, it will
display S9+ and the specific dB value.
◉ The S meter represents the intelligibility of the voice and the strength
of the radio signal, with S9 indicating very clear voice and strong signal.
◉ S9+20 or S9+60 indicates that the signal has reached full scale and
exceeds 20dB or 60dB.
◉ When using a repeater, the received signal is generally fixed, so the
signal report remains largely unchanged.
◉ This signal report is for reference only.
Enter Text
◉ When editing channel names, device names, etc., you can directly
input Chinese and English information on the device.
◉ Press the FM key to switch languages, selecting from Pinyin,
lowercase English, uppercase English, and numbers.
◉ Input the letters of the Pinyin using the keypad's grid, use the
up/down keys to select the range, press the 【Menu Button】 to select,
then use the up/down keys to choose the corresponding text, and press
the 【Menu Button】 to confirm the input.
Monitor
To Next Page
Loading...
