Talkpod A36plus - TONE, PTT-LT, VOX Menu Settings

www.talkpodonline.com
number.
Channel Name
In channel mode, display the channel
name.
Channel Frequency
In channel mode, display the channel
frequency.
22
MDF-B
Channel Number
In channel mode, display the channel
number.
Off
Turn off voice-operated transmission
(VOX).
33
VOX
Level 1-9
Activate voice control sensitivity, where
level 1 is the most sensitive and level 9 is
the least sensitive.
24
VOX DELAY
0.5sec~2.0sec
From 0.5 to 2.0, with 0.1 increments as
options.
Off
Release the PTT without sending a
shutdown code, typically used in relay
transfer to produce noise, confirming if
the signal from the device is being
relayed.
25
STE
On
After releasing the PTT button, the device
emits a shutdown code to suppress the
momentary noise at the receiving end.
26
TAIL FREQ
55Hz、62.5Hz
Different brands of walkie-talkies have
varying tail tone elimination frequencies;
selecting the corresponding frequency can
eliminate the "click" sound.
None
Default is set to 90 degrees.
27
TAIL PHASE
120 degrees
180 degrees
240 degrees
Select the appropriate phase according to
different repeaters to eliminate the "click"
end tone.
Off
Turn off the ID code function
28
ANI
FUNCTION
On
Transmit the device name simultaneously
through signaling when transmitting