The device emits the tone sound during
automatic ID transmission.
The device emits the tone sound for both
keypad and automatic ID transmissions.
S-CODE( Sq
uelch Tail
Eliminate)
Turn off this feature if the noise is not
needed
Plays a specific tone when Side Key 3 is
pressed while pressing PTT
No tone at the end of transmission
The default end of transmission tone
A distinctive signaling end tone
If the transmitting device activates the tail
tone elimination feature, the receiver will
hear a simulated GSTAR signal beep. If
this feature is not activated, the receiver
will first hear the persistent click sound.
Activates the FM radio function.
Switch between high and low power
Scan frequencies or channels.
Scan frequencies and sub-tones.
Activate the weather forecast function
Activate remote sub-tone scanning
Set Side Key 2 as the transmit button for
Band B.
Activates FM radio function.
Switch between high and low power
To Next Page
Loading...
