process to prevent interference with the charging program.
- If the usage time significantly decreases even after a full charge, it
indicates the battery's end of life. Please replace it with a new one.
- If the battery is fully charged, do not unplug and replug it for charging
again, as this may shorten the life or damage the battery.
- Do not charge when the battery or walkie-talkie is wet. Before
charging, dry it with a cloth to avoid danger.
All batteries can cause damage or injury when conductive metals like
jewelry, keys, or ornaments touch the electrodes. These conductive
metals may form a short circuit and generate significant heat. Be
especially cautious when handling any battery, especially when placing
it in a pocket, purse, or other metal container.
Follow these steps for charging:
1. Plug the charger's power cord into a 220V AC outlet.
2. Place the battery or walkie-talkie with the battery on the charging
stand, or plug the USB charging cable into the battery's USB interface.
3. The charging process starts when the charging indicator light turns
red.
4. Charging takes about 8 hours; when the indicator light turns green,
charging is complete.
Maintenance and Cleaning
1. Do not lift the walkie-talkie by the antenna, earphone, or speaker
microphone.
2. Wipe the dust and dirt off the walkie-talkie with a lint-free cloth to
prevent poor contact.
3. Cover the earphone jack when the walkie-talkie is not in use.
4. After long-term use, the buttons, control knobs, and case of the
walkie-talkie can get dirty and should be cleaned with a neutral
To Next Page
Loading...