Tanaka MPC-102A User Manual

Mini-Pour/Cloud Point Tester
Model MPC-102A/102L
Instruction Manual
Ver.2.21 090120
Read this manual thoroughly before using the product,
and store in a safe place for future reference.
TANAKA SCIENTIFIC LTD, TOKYO, JAPAN

Tanaka MPC-102A Specifications

General

Brand	Tanaka
Model	MPC-102A
Category	Measuring Instruments
Language	English

Summary

Foreword and Product Usage

Product Usage Guidelines

Specifies the product is for measuring pour and cloud points as per ASTM D6749 and D2500, and not for other purposes.

Before Use Precautions

General Safety Warnings

Coolant and Electrical Safety

Covers coolant handling, warnings against methanol, and initial electrical connection safety practices.

Electrical Safety and Grounding

Handling and Operational Precautions

Operational and Maintenance Precautions

Control Panel Functions

Operational Principles

Installation Guide

Installation Site Requirements

Coolant and Electrical Connections

Electrical Safety and Grounding Details

Routine Daily Inspection

Pre-Use Inspection Checklist

Prior to Testing Procedures

Power On and Display Screens

Setting Coolant Temperature and Specimen Prep

Specimen Preparation Steps

Test Mode Selection

Preset Test Mode Options

Setting Expected Pour/Cloud Point

Test Procedure and Preheating

Starting and Preheating Process

Light Intensity Measurement Check

Error Handling and Air Leak Check

Cooling and Pour Point Detection Start

Cloud Point Detection Process

Pour Point Detection Process

Data Storage and Test History

Periodic Maintenance and Consumables

Troubleshooting and Warranty Information

Technical Specifications

Product Warranty Details