Need help?Do you have a question about the TANDBERG Videoconferencing System and is the answer not in the manual?
General| Category | Conference System |
|---|---|
| Codec | H.264, H.263, H.261 |
| Audio Codec | G.711, G.722, AAC-LD |
| Network Protocols | H.323, SIP |
| Interfaces | Ethernet, HDMI, DVI, USB |
| Power Consumption | Varies depending on the specific model |
| Dimensions | Varies depending on the specific model |
| Weight | Varies depending on the specific model |
Displays system information after boot-up, including network details.
Instructions for initiating and terminating calls using dialing keys and connect/disconnect buttons.
Local phone book for storing and retrieving contact information for calls.
Adding sites to a multipoint conference, including managing names and quality.
How to control the audio volume level using the volume keys.
Displaying your own video feed or moving it as a Picture-in-Picture.
Mute or unmute the system's microphone with an on-screen indicator.
Manages incoming calls and display status, allowing acceptance or rejection.
Using remote control keys for camera pan/tilt and zoom functionality.
Choosing between different video input options like main camera or PC.
Saving and recalling up to ten different camera positions for quick access.
Adding and managing a secondary video stream for document cameras or other sources.
Establishing and managing multipoint conferences with multiple sites.
Accessing and controlling multipoint conference features like requesting floor or taking chair.
Important safety and operational guidelines before installing the system.
Steps for unpacking and physically placing the system components.
Guide to connecting various power, monitor, microphone, camera, and network cables.
Initial setup and configuration of the system, including name, language, and monitors.
Configuration settings for ISDN Basic Rate Interface, including switch type and line setup.
Settings for connecting the system to a Local Area Network and H.323 Gatekeeper.
To Next Page
