Tandy Color Computer 3 User Manual

Program Pak
installation
BE SURE
NOT
TO PLUG IN
A
CARTRIDGE
WHILE YOUR
COMPUTER
IS TURNED
ON.
The
computer must
always
be
turned OFF
whenever
a
ROM
cartridge is
either plugged
in
or
removed.
BE
SURE
NOT
TO
INSERT
YOUR
FINGERS
OR
OTHER
OBJECTS
INTO
THE CARTRIDGE SLOT.
Doing
so
could
seriously damage
your computer.
To install
a
Program
Pak,
locate the
cartridge
slot on
the
right
side of
the
computer.
Carefully insert the cartridge with
the
label side
up
and
the open end facing
into the slot.
The
cartridge should slide
smoothly into
the recessed receptacle
in the
computer case.
If
you
have
difficulty
inserting
the cartridge, it might
be
upside
down.
Be
sure
the
label is
facing up, and then
try again.
Some Program
Paks
will not auto
start. Documentation
for
one
of
these cartridges may tell
you to
type
in
EXEC &HC000.
Instead, type
in:
EXEC &HE010
This command
will
get the Program
Pak
started
for you.
To
remove
a cartridge, FIRST
TURN
OFF
THE COMPUTER;
then
gently
pull out the
cartridge. Store
it
in
a
safe place.
24

Tandy Color Computer 3 Specifications

General

Brand	Tandy
Model	Color Computer 3
Category	Desktop
Language	English