EasyManua.ls Logo

Tangent Dab2go BT - Alarm and Sound Settings; Alarm Configuration Details; Snooze and Alarm Off; Cancelling Alarms

Tangent Dab2go BT
152 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
Alarm states:
On or Off
Alarm time:
On Time: 00:00 (manually set up the time )
Alarm duration
time:
15/30/45/60/90 minutes
Alarm source:
DAB, FM or Buzzer (since you were selected DAB or FM as
alarm source, select last listened or saved preset station to
play when alarm sounds)
Alarm active day:
Daily, Once, Weekends or Weekdays
Alarm volume:
turn TUNE/SELECT knob to adjust the alarm volume
3. When display shows 'Alarm Saved', the alarm setting is successful.
4. To temporarily switch off alarm, press SNOOZE button to activate Snooze function
when the alarm is soundings. Press SNOOZE button repeatedly can set Snooze time
of 5, or 10 minutes in turn.
5. To turn off alarm, press /VOLUME knob or ALARM button when the alarm is
soundings.
6. To cancel Alarm, refer to steps 1-3 to set Alarm states to ā€˜Off’.
7. In Off mode you can push the alarm button once for alarm 1 and twice for alarm 2, use
select knob to choose ON/OFF and push select to make the choice.
Equaliser
Select this option to choose a sound equalisation profile Each of the equalisation settings
will change the tone of the sound from your radio when selected.
1. Press MENU button and then turn TUNE/SELECT knob to select ' Equaliser ', press
TUNE/SELECT knob to confirm.
2. Turn TUNE/SELECT knob and then press it to select and set up Treble and Bass.

Related product manuals