Tangent Dab2go BT - General Operation Features; Sleep Timer Function; Time and Date Configuration; Alarm Setup and Control

13
General Operation
Sleep
This function enables your unit to switch to standby mode by itself after a set sleep time
1. Press MENU button and then turn TUNE/SELECT knob to select 'Sleep', press
TUNE/SELECT knob to confirm.
2. Turn TUNE/SELECT knob to select off/15/30/45/60/90 minutes, then press
TUNE/SELECT knob to confirm the setting.
3. To turn the sleep function off while the sleep timer is still counting down, select 'Sleep'
option, turn TUNE/SELECT knob to select 'Sleep off'.
Time
1. Press MENU button and then turn TUNE/SELECT knob to select 'Time', press
TUNE/SELECT knob to confirm.
2. Turn TUNE/SELECT knob to select options, and then press TUNE/SELECT knob to
confirm the setting.
Set Time/date:
Manually set-up both Time and Date
Auto update:
‘Update from ANY’, ‘Update from DAB’, ‘Update from
FM’ or ‘No update’
Set 12/24 hour format:
‘Set 24 hour’ or ‘Set 12 hour’
Set date format:
‘DD-MM-YYYY’ or ‘MM-DD-YYYY'
Alarm
Your radio includes dual alarms. Setting Alarm, make sure setting time at first.
1. Press ALARM button on the unit repeatedly to select ‘Alarm 1’ or ‘Alarm 2’, press
TUNE/SELECT knob to confirm
2. Turn TUNE/SELECT knob to select options, and then press TUNE/SELECT knob to
confirm the setting.