TaoTronics TT-AH018 User Guide

EN
Important
1. Leave the humidier in the room at least half an hour before use, especially when
outdoor temperature is below 5 ℃ / 41 ℉.
2. Do not turn on the unit when there is no water inside the tank to avoid damages.
3. Do not touch the water in the tank or any component of the tank while the unit is
working.
4. To prevent fog and mildew, please use distilled or puried water.
5. Please install the water tank properly before use of the unit, never pour water into
the base.
Package Contents
Specications
Model
Mist Output
Warm Mist Temperature
Voltage
Water Tank Volume
Power
Working Time on a Full Tank
Applicable Space
TT-AH018
300 mL/h (high mist)
200 mL/h (medium mist)
100 mL/h (low mist)
60℃ / 140℉ (high)
50℃ / 122℉ (medium)
40℃ / 104℉ (low)
AC 100-127V 50 Hz / 60 Hz (US)
AC 220-240V 50 Hz / 60 Hz (EU)
5.5 L / 1.4 Gallons
280W
16h-45h
20-50m
2
/ 200-450ft
2
How to Use
1. Remove the tank cover, take out the water tank by holding the tank handle.
2. Fill the water tank.
3. Place the tank back into the base, cap on the cover.
4. Connect to an appropriate power source. The unit enters standby mode with a
beep sound, the LED display shows the RH of current environment.
Note: You can ll the water tank without removing it from the base, pay
attention to avoid water getting into the air outlet.
01/02
TaoTronics Top Fill
Humidier
(Model: TT-AH018)
Cleaning Brush User GuideThank You Card
TOP FILL HUMIDIFIER
User Guide
www.taotronics.com

TaoTronics TT-AH018 Specifications

General

Brand	TaoTronics
Model	TT-AH018
Category	Humidifier
Language	English