How to Use
Charging
1. Connect the Micro-USB end of the charging cable to the
charging port of the Bluetooth
®
adapter.
2. Plug the USB end of the charging cable to a USB charging
Control Functions
Function
Power On / Off
Pairing
Mode Switch
Play / Pause
Volume + / -
Next / Previous
Track
Operation
Press and hold the Power Button
for 3 seconds
When powered on, press the Power
Button twice to start pairing
Slide the Mode Switch to and
from TX and RX
In RX mode, press the Power Button
once to play / pause music
In RX mode, press and hold the
Volume + / - Button
In RX mode, press the
Volume + / - Button once
Note:
• The mode can only be successfully switched after the
adapter is turned off for 3 seconds. After the switch, the
pairing history of the devices will be cleared.
LED Indicators
LED Indicator
Solid Red LED
LED Off
Flashing Red
and Blue
Flashing Red
Solid Blue LED
Flashing Blue
Status
Charging
Fully charged
Pairing in TX / RX mode
Low battery
Successfully paired
Powered on but not paired
with Bluetooth
®
devices
05/06
To Next Page
Loading...
Need help?
General
