Troubleshooting
My adapter will not power on.
Please recharge it and make sure the adapter has enough
battery power. Plug the unit into a charger and see if the LED
indicator turns red.
I am having trouble pairing and connecting to my Bluetooth
®
device.
Please check the following:
• Your Bluetooth
®
device supports the A2DP prole.
• The adapter and your device are next to each other or within
3 feet / 1 meter.
• The adapter is in pairing mode; this is indicated by the LED
ashing in red and blue alternately.
After connecting and pairing with my Bluetooth
®
device, I
cannot hear any music from my sound system.
Please check the following:
• Your sound system is connected to the adapter via the
3.5mm Audio Cable.
• Make sure the music volume is at an audible level on both
your Bluetooth
®
device and sound system.
• For some systems, you may need to select “AUX” or “Line-in” as
the audio input mode.
• Please make sure your audio device is playing music via
Bluetooth
®
. Some devices (such as computer) require
manually selecting the music output mode.
Can I use the TT-BA08 adapter while it is charging?
Yes, the adapter is designed to be used while charging. The
internal circuit is protected from over-charging.
Warranty
This product is covered by the TaoTronics Product and Labor
Warranty for 12 months from the date of its original purchase. If
manufacturing defects occur, please contact TaoTronics
support (support@taotronics.com) immediately to launch a
warranty claim. We will instruct you on how to return the
defective unit back to us for repair or replacement. No return
will be accepted without seller authorization.
The following are excluded from TaoTronics warranty cover:
• Device purchased as 2nd hand, used, or from unauthorized sellers
• Damage resulted from misuse and abusive action
11/12
To Next Page
Loading...
Need help?
General
