TaoTronics TT-HE007 - User Manual

Questions and Answers

J
Jeffery LewisAug 12, 2025
What to do if my TaoTronics Heater does not start?
- D
  David WaltonAug 12, 2025
  If your TaoTronics Heater doesn't start, several factors could be the cause: * Ensure the power cord is properly plugged into a powered electrical outlet. * If Overheat Protection has been activated, turn the heater OFF, unplug it, and let it cool down. Remove any obstructions around the heater and wait 5-10 minutes before plugging it back in. * Verify that your circuit breaker or fuse is working and that the heater is on a flat, even surface. * Check that the thermostat is set higher than the current room temperature.
R
Richard LiAug 18, 2025
Why does my TaoTronics Heater suddenly stop during heating?
- M
  markoliverAug 19, 2025
  Your TaoTronics Heater might stop suddenly during heating due to two main reasons: * If the ambient temperature exceeds 50°C / 122°F, unplug the heater and allow it to cool down before turning it on again. * If the heater is tipped over, place it on a flat, level, and stable surface, ensure it remains upright, and then turn it back on.
M
Mark JonesAug 27, 2025
How to fix the P4 error on my TaoTronics Heater?
- B
  Barbara Ramirez DDSAug 27, 2025
  If your TaoTronics Heater displays a 'P4' error, this indicates that the Tip-Over Protection has been activated. To resolve this, place the heater back on a flat, level, and stable surface.
L
Laura JamesSep 3, 2025
How to fix FF error on TaoTronics Heater?
- L
  Luis WashingtonSep 4, 2025
  If your TaoTronics Heater displays 'FF', it means the overheat protection is active because the ambient temperature is above 50°C / 122°F. Unplug the heater and turn it on again when the room temperature drops below 50°C / 122°F.