TaoTronics TT-TF009 - Replacement of Batteries; Battery Replacement Procedure and Cautions; Height;Angle Adjustment; Tilt and Height Adjustment

10/EN 11/EN
1. Press the locking button to remove the
battery holder.
2. Replace the battery with the same type
(CR2025, 3V), making sure the (+) side facing
up.
3. Push in the holder until securely locked
into place.
Replacement of Batteries
Facing up
CAUTION:
• Replace with new batteries of the same
type when replacement is required.
• When not using the remote control for a
long time, please take out the batteries.
• DO NOT attempt to dismantle the
batteries.
• DO NOT dispose the batteries in fire,
batteries may explode or leak.
• DO NOT use rechargeable batteries.
Height/Angle Adjustment
Tilt Control
Hold with both hands and
move to the desired angle.
Height Adjustment
Loosen the Knob on pole and
secure to the desire height.