Tapco Link.FireWire - APPENDIX C: LINK.FIREWIRE SPECIFICATIONS; Analog Specifications

16
appendIx c:
LInk.fIrewIre specIfIcatIons
Analog Specifications
Frequency Response
Any Input to Monitor Output: ±0.5 dB, 22 Hz to 20 kHz @ 48 kHz SR
Any Input to Phones Output: ±1.0 dB, 30 Hz to 20 kHz @ 48 kHz SR
(600Ω load)
Distortion
THD + Noise (1 kHz, –1 dBFS @ 48 kHz SR)
Mic Input to FireWire or S/PDIF Output:
< 0.004%
Noise
Mic Pre Equivalent Input Noise (EIN)
20 Hz to 20 kHz Bandwidth, 150Ω source impedance:
>120 dB typical @ 30 dB gain
Input Gain Control Range
Mic In: 0 dB to +52 dB
Line In/Instr In: –20 dB to +32 dB
Phantom Power
+44 VDC (±10%)
Input Impedance
Mic Input: 3 kΩ
Line Input: 20 kΩ balanced, 20 kΩ unbalanced
Instr Input: 1 MΩ
Output Impedance
Monitor Output: 200Ω balanced
Headphone Output: 56Ω
Crosstalk
Monitor Output (1 kHz, Left to Right)
–93 dB
Headphone Output (1 kHz, Left to Right)
–93 dB