Tapo RV10 Plus - Empty the Bin; Clean the Filter

OFF
ON
Empty the Bin
1. Remove the dustbin and water tank.
Clean the Filter
1. Remove the dustbin and
open the lid.
2. Remove the lter.
3. Clean the lter with a
cleaning brush.
4. Wash the dustbin and lter.
5. Air-dry the dustbin and lter
thoroughly, then install the lter
in the previous orientation.
OFF
ON
2. Open the dustbin door to empty the dustbin.
3. Place the dustbin back inside the robot vacuum.
Do not wash with hot water or detergents.
11