Tapo RV10 Plus - Robot Vacuum Overview; Power;Clean Controls; Docking and Charging; Spot Cleaning and Child Lock

Power/Clean
Combination Button
• Press once: Start/pause cleaning.
• Press and hold for 5 seconds: Turn on/o the robot vacuum.
• Press and hold simultaneously for 5 seconds:
Enter setup mode to congure network.
• Press and hold simultaneously for 10 seconds:
Restore to factory default settings.
• Return to the dock to charge.
• Empty the bin when docked.
Dock
• Press once: Start spot cleaning.
• Press and hold for 5 seconds: Turn on/o the child lock.
Spot Cleaning/Child Lock
*For the rst use, slide the power switch from OFF to ON to turn on.
LED
• Red: Battery level ＜ 20%; Error
• Orange: Battery level between 20% and 80%
• Green: Battery level ＞ 80%
Overview
Robot Vacuum
2